Follow

GBDeflicker4 Move a License to a new computer (and other license actions)

Move a License to a Different Computer

Because a license is granted for use one computer, it must be released from that computer before it can be activated on another computer. Follow the instructions for Release License

Release License

Use the Release button to deactivate the license on your computer.  This function sends a request to our license server over an internet connection.

 A license must be released before it can be moved to a different computer. Once released, the license will no longer be valid on the host computer. If it is accidentally released, it can be restored.

 A license must be released before you make any major changes to your computer such as re-installing the OS, changing the hard disk or adding memory. After you make the change, you can restore or re-activate the license.

 1)  While holding down the Shift and OS keys on the keyboard, click the Register button.

0-Cropper[283].jpg

2)      Select the “Release License” tab and click the OK button.

Screen_Shot_2013-12-06_at_1.39.47_PM.png

3)      Your serial number is now blocked on this computer so it can now be activated on a different computer.

Screen_Shot_2013-12-06_at_1.47.45_PM.png

Restore License

Use the Restore button to restore a previously released license. Do not use Release/Restore to repeatedly move a license back and forth between computers – it can only be performed a limited number of times before the license is permanently deactivated.

1) While holding down the Shift and OS keys on the keyboard, click the Register button.

0-Cropper[283].jpg

2)      Select the “Restore License” tab and click the OK button.

Screen_Shot_2013-12-06_at_1.50.10_PM.png

Remote Reset

This option resets a license to its original un-activated state. This can only be done with prior authorization from Granite Bay Software. Only use this option if we ask you to. It won’t do anything without prior authorization.

 1) While holding down the Shift and OS keys on the keyboard, click the Register button.

0-Cropper[283].jpg

2)      Select the “Remote Reset” tab and click the OK button.

Screen_Shot_2013-12-06_at_1.54.54_PM.png

Block License

Use this option to permanently block this software license on this computer. Do this only if request by Granite Bay Software.

 1) While holding down the Shift and OS keys on the keyboard, click the Register button.

0-Cropper[283].jpg

2)      Select the “Block License” tab.

 Screen_Shot_2013-12-06_at_2.07.32_PM.png

Screen_Shot_2013-12-06_at_2.09.19_PM.png

Unblock License

Use this option to unblock a previously blocked license. This can only be done after contacting Granite Bay Software to get an unblock code unique to your computer.

 1) While holding down the Shift and OS keys on the keyboard, click the Register button.

0-Cropper[283].jpg

 2) Select the “Unblock License” tab and enter the Unblock code you have been given.

Screen_Shot_2013-12-06_at_2.13.43_PM.png

Screen_Shot_2013-12-06_at_2.17.52_PM.png

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk